ISRO To Make Its Own Atomic Clock! Here’s Why This Is A Game Changer

In 2016, India launched its first navigation satellite, the Indian Regional Navigation Satellite System (IRNSS-1A). It was soon found that there was a problem in one of the rubidium atomic clocks on board the satellite. And later, when the other two atomic clocks also failed, ISRO was at a loss.

The European atomic clocks could not be repaired as the design, and the functionality was not native to the ISRO team.

And this was not the only instance of it either, as nine out of the 21 clocks in the IRNSS fleet have failed, says a source to The Times of India.With this setback, India’s plans for regional GPS are hindered, because of repeated failures of the atomic clocks on the satellites.

Owing to this, ISRO has planned to make its atomic clocks, from the design to the build. This will let ISRO have full control over it and take steps to perfect the technology.

Tapan Misra, Director, Space Applications Centre (SAC), Ahmedabad, said, “SAC has developed an indigenous atomic clock, and this clock is currently undergoing a series of qualification tests. Once it successfully clears all tests, the desi atomic clock will be used in an experimental navigation satellite to test its accuracy and durability in space.”

Well, if atomic clocks are hard to make and prone to breakdowns, why do engineers insist on them? Can’t my regular Casio wristwatch do the trick just as well?

Apparently not. Here’s why.

Firstly, regular watches have an error of 10-20 seconds in a month, while atomic clocks have an error of 1 second in 100 million years!

So, a GPS receiver listens and compares the different timing signals from GPS satellites, uses that information to calculate exactly where on earth you are.

And if the clocks on the satellites tend to be even a little off, you will miss the next left turn by 100 meters and lose your way to the office.

Hence, it’s crucial to keep the most accurate clocks on board these satellites. And that’s why engineers insist on these.

So, how does an atomic clock function? In the early days, we looked upon the skies to keep time, but today, we look into the atoms themselves.

Atomic clocks derive their time from caesium (Cs) or rubidium (Rb) atoms. These elements have atoms that jump between two atomic states.

When an atom changes from a high-energy state to that of lower energy, the difference in energy is emitted as light. We count the ticking rate or frequency of this light and determine time. It is interesting to note that this difference in energy is always constant.

So for a caesium element, about 9,19,26,31,770 frequency makes up one second. By measuring this frequency, atomic clocks keep up time with high accuracy.

“With the development of the desi atomic clock, ISRO has become one of the few space organisations in the world that have gained the capability to develop this highly sophisticated technology. We don’t know the design and technology of the imported atomic clock. But the desi clock has been developed based on our designs and specifications. This clock is as good as the imported one. We are hopeful that it will easily work for more than five years.” said the SAC director.

So, let the gods of technology be with ISRO engineers as they develop the native atomic clock for navigation satellites that will undoubtedly benefit the whole of India.

(Edited by Shruti Singhal)

Hey, you may also like: He Once Walked Barefoot to School. Today, This Village Lad Is an ISRO Scientist!

Like this story? Or have something to share?
Write to us: [email protected]
Connect with us on Facebook and Twitter.
NEW: Click here to get positive news on WhatsApp!

Similar Story

Laundromats in India? Couple Built Rs 100 Crore Biz Washing Dirty Linen Across 100 Cities

Faridabad’s Arunabh Sinha and his wife Gunjan Taneja launched UClean in 2017 to set up an organised laundromat service in India. Currently, they are spread across 100+ cities and have 350+ outlets across the country.

Read more >